- Measurement of passive optical devices in <0.2s(5nm) reduces total analysis time
- Dedicated applications for evaluating active optical devices
- Excellent cost performance
- Dynamic range performance ≤58 dB (0.4 nm from peak wavelength)
- 30 pm minimum resolution
- Supports SM and MM fibers
- Lightweight, 50% less power consumption
Improved Production Efficiency Reduces Measurement and Inspection Time
The MS9740A is a benchtop optical spectrum analyzer covering 600 nm to 1750 nm. The MS9740A offers high-performance optical resolution and high-speed measurements to support the needs of device and component manufacturers.
Waveform data can be measured and transmitted to external control equipment within 0.2s -- a 5x improvement over previous Anritsu models.
This enables optical device manufacturers to reduce costs and time for testing and analysis by:
- Improving sweep speed (measurement time), and
- Accelerating data transfer to control equipment after measurement
Combine these overall improvements with the ability to do basic analysis, and the result is excellent return on investment and improved productivity.
|Specification ||Details |
|Applicable optical fiber ||10 µm/ 125 µm SM fiber (ITU-T G.652), 50 µm/ 125 µm GI fiber |
|Optical connector ||User replaceable: FC, SC, ST, DIN, LC |
|Wavelength measurement range ||600 nm to 1750 nm |
|Wavelength accuracy *1 ||±20 pm (1520 nm to 1620 nm, Resolution: 0.03 to 0.2 nm) *2, |
±100 pm (1520 nm to 1620 nm, Resolution: 0.5, 1.0 nm) *2
|Setting resolution ||0.03, 0.05, 0.07, 0.1, 0.2, 0.5, 1.0 nm |
(RBW: 3dB optical filter: transmission bandwidth)
|Maximum input power ||+23 dBm (Optical ATT: On) |
|Dynamic range *1 ||High dynamic range: 60 dB (0.4 nm from peak wavelength) |
Normal dynamic range: 58 dB (0.4 nm from peak wavelength)
[Resolution: 0.05 nm, 1550 nm, Optical Att: Off, 20 to 30°C]
|Sweep ||Sweep width: 0.2 nm to 1200 nm, 0 nm |
Sweep speed: ≤0.2 sec. (span 5 nm)
[Resolution: 0.1 nm, VBW=10 kHz, Normal dynamic range, center 1550 nm, sweep start to stop, no optical input, sampling point: ≤501]
|Dimensions and mass ||426 (W) x 177 (H) x 350 (D) mm (excluding projections) ≤15.0 kg (without option) |
*1: Using SM fiber (ITU-T G.652), after 2 hours of warm-up (the Repeat sweeping performed at Span 100 nm or more and VBW 10 kHz or more during the warm-up operation), after Auto Align, at stable room temperature.
*2: Built-in option 002, after Wl cal (ref) wavelength calibration execution, at stable room temperature.