Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | ANPV0202ADP |
| Part Number | ANPV0202ADP |
| Features | Improved inspection reliability while reducing engineering time |
| General specifications : Rated operating voltage | 24 V DC |
| General specifications : Operating voltage range | 21.6 to 26.4 V DC (including ripples) |
| General specifications : Rated current consumption | 1.2 A max. |
| General specifications : Ambient temperature during use | 0 to +45 degrees 32 to +113 degrees Fahrenheit (no freezing or condensation) |
| General specifications : Storage ambient temperature | -20 to +60 degrees -4 to +140 degrees Fahrenheit (no freezing or condensation) |
| General specifications : Ambient humidity during use | 35 to 85 % RH (at 25 degrees 77 degrees Fahrenheit, no freezing or condensation) |
| General specifications : Storage ambient humidity | 35 to 85 % RH (at 25 degrees 77 degrees Fahrenheit, no freezing or condensation) |
| General specifications : Noise immunity | 1,000 V, Pulse width: 50 ns, 1 micros (using the noise simulator method) |
| General specifications : Vibration resistance | 10 to 55 Hz, 1 sweep/min, double amplitude of 0.75 mm 0.03 in, 30 minutes each in the X, Y, and Z directions |
| General specifications : Shock resistance | 196 m/s2, 5 times each in the X, Y and Z directions |
| General specifications : Insulation resistance (initial value) | 100 MOhm or higher (measured by a 500 V DC megger) * Input and output terminals — Power and ground terminals Input and output terminals — Non-energized metal part Power terminal — Non-energized metal part * The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit. |
| General specifications : Breakdown voltage (initial value) | 500 V AC for 1 min (600 V AC for 1 sec), Cutoff current: 10 mA * Input and output terminals — Power and ground terminals Input and output terminals — Non-energized metal part Power terminal — Non-energized metal part * The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit. |
| General specifications : Battery life | 10 years approx. (at 25 degrees 77 degrees Fahrenheit) |
| General specifications : Weight | 0.5 kg approx. (including terminal blocks) |
| General specifications : Pollution degree | Pollution degree 2 |
| Functional specifications : CPU | 32-bit, RISC CPU & DSP |
| Functional specifications : Input/output : Cameras | Up to two cameras selected from among 0.3M grey/grey compact/color cameras (640 x 480) and 2M grey/color cameras (1,600 x 1,200) can be connected. Up to two 4M grey cameras can be connected. * The 4M grey camera cannot be used in combination with another type of camera. The ANPVC82** dedicated compact camera cable is required to connect the compact cameras. |
| Functional specifications : Input/output : Monitor output | VGA (640 x 480) output |
| Functional specifications : Input/output : Memory card | SD/SDHC memory card |
| Functional specifications : Input/output : PLC communication compatible models (RS232C) | Panasonic Electric Works SUNX: FP series OMRON: C, CV, and CS1 series Mitsubishi Electric: A, Q, FX, and FX2N series Fuji Electric: MICREX-SX SPH series Allen-Bradley: SLC500 series Modbus RTU compatible (performance confirmed with Siemens S7-1200) |
| Functional specifications : Input/output : PLC communication compatible models (Ethernet) | Panasonic Electric Works SUNX: FP series, ET-LAN unit Mitsubishi Electric: Q series |
| Functional specifications : Input/output : PLC communication command | Specifiable external command instruction using PLC communication Command input format: polling / parallel input |
| Functional specifications : Input/output : Parallel | 14 inputs / 15 outputs |
| Functional specifications : Input/output : Keypad input | Connector for dedicated keypad (ANPVP**), 1 channel |
| Functional specifications : Input/output : USB | USB 2.0, A-B type (Only PVWIN200) |
| Functional specifications : Menu display | Four languages (five fonts), Switchable (Japanese, English, Korean, Traditional Chinese and Simplified Chinese) |
| Functional specifications : Monitor display (VGA) | Split-screen display of up to two camera images, Zoom function (2 to 400%) Image display: Through/Memory/NG object images Display effects: Greyscale/Slice level group/Preprocessing group/Color/Extraction and binary/Grey conversion image, Display area (640 x 480) |
| Functional specifications : Processing methods | Greyscale processing/Thresholding processin/Color extraction/Grey conversion |
| Functional specifications : Processing resolution | 2M camera (grey/color): 1,600 horizontal x 1,200 vertical pixels 0.3M camera (grey/grey compact/color): 640 horizontal x 480 vertical pixels 4M camera (grey): 2,048 horizontal x 2,048 vertical pixels |
| Functional specifications : Trigger input | Select from: All cameras or detection trigger |
| Functional specifications : Number of connected cameras | Up to two cameras |
| Functional specifications : Camera connection | Connection by Power Over Camera Link (PoCL) |
| Functional specifications : Capture method | Frame shooting only. Capable of partial capture of one point In partial capture mode, the minimum capture area to be set for the 0.3M/4M camera is one line, and that for the 2M camera is 100 lines. (The area can be set in increments of one line for the grey camera, and two lines for the color camera.) |
| Functional specifications : Shutter speed | 30 micros to 1,000 ms (Set in increments of 10 micros) 0.3M camera (grey compact):100 micros to 500 ms (Set in increments of 10 micros) |
| Functional specifications : Gain setting range | 1.0 to 5.0 |
| Functional specifications : No. of product types | 256 types max. (depends on setting data) |
| Functional specifications : Password | Switching from the current operating screen to the setup screen can be password controlled (within 15 characters). Administration classification: invalid/valid (limit setting screen transition and limit regular menu switching) |
| Functional specifications : Inspection functions (Checkers) | 1,000 checkers/product type max., including those for geometry calculation and character/figure drawing (depends on setting data) Position adjustment, Position rotation adjustment, Rotation adjustment area size adjustment, Line, Binary window, Grey window, Binary edge, Grey edge, Feature extraction, Smart matching, Contour matching, Flaw detection, Connector (binary window), Connector (grey window), Connector (grey edge), Smart edge (circles), Smart edge (line), Color window * Number of range masks: 16 ranges/checker * Maximum registrable number of smart matching and contour matching templates: 2,000 pcs. |
| Functional specifications : Geometry calculation | 1,000 checkers/product type max., including those for inspection functions and character/figure drawing (depends on setting data) Seven calculation functions (distance between two points, intersection of two lines, median lines of two lines, perpendicular distance, approximate straight line, approximate circle, and approximate ellipse) |
| Functional specifications : Character/Figure drawing | Up to 10,000 characters/graphics (1,000 checkers x 10)/product type can be displayed on the images (depends on setting data). |
| Functional specifications : Inspection operation mode | Sequential processing: After completing the result output, the next image capture for inspection can be started. Parallel processing: After the capture and the synchronized output of results of the previous inspection are completed, the image capture process for the next inspection is ready to start, and then the capture and inspection results output are processed concurrently. |
| Functional specifications : Slice level group | 16 group/camera, 256-grey scale (0 to 255) |
| Functional specifications : Image preprocess | Preprocessing selections: Grey conversion / Color extraction / Grey preprocessing |
| Functional specifications : Image preprocess : Grey conversion | Available only when a color camera is connected. For each product type, 16 groups/camera Each R/G/B value setting for grey conversion can be changed within the range of -1,000 to 1,000. |
| Functional specifications : Image preprocess : Color extraction | Available only when a color camera is connected. Color extraction mode: Selectable between high speed and expansion Number of extractable colors; High speed: A total of 16 colors when one camera is connected and eight colors when two cameras are connected. Expansion: A total of 128 colors when one camera is connected and 64 colors when two cameras are connected. Only eight registered colors can be selected from one checker. |
| Functional specifications : Image preprocess : Grey preprocessing | For each product type, 16 groups/camera, 10 stages max. Preprocessing filters: 21 types (Dilation, Erosion, Erosion to Dilation, Dilation to Erosion, Auto correction, Grey cut, Area averaging, Correction settings, Median, Smoothing, Sobel, Prewitt, Laplacian, Edge extraction X, Edge extraction Y, Sharpen, Tophat, Dynamic, Grey difference, Rotation, and Reflect) |
| Functional specifications : Numerical calculation | 1,000 formulas/product type max., including those for judgement output (depends on setting data) Calculations involving output values of inspection functions |
| Functional specifications : Numerical calculation : Operators | Four fundamental operations (+, -, x, /), Bracket operations, Trigonometric functions (14 types), Comparison functions (6 types), Math functions (15 types), Geometry functions (18 types), Coordinate conversion functions (8 types) |
| Functional specifications : Numerical calculation : Statistic data operation items | Scan count/OK count/NG count/Average/Variance/Max./Min./Range/OK average/ OK variance/OK judgment max./OK judgment min./OK range/NG average/NG variance/ NG judgment max./NG judgment min./NG range User limit: 1,000 items /product type max. |
| Functional specifications : Numerical calculation : Other operation items | Previous data of numerical calculation and judgment results, general-purpose registers |
| Functional specifications : Numerical calculation : Number of reference operators | 16 items/formula max. |
| Functional specifications : Judgement output | 1,000 formula/product type max., including those for numerical calculation (depends on setting data) Substitution for and logical calculation of judgement results from checkers and numerical calculations |
| Functional specifications : Judgement output : Operators | NOT/AND/OR/XOR/Brackets |
| Functional specifications : Judgement output : Number of reference items | 16 items/formula max. |
| Functional specifications : Judgement output : Others | Total judgment conditions, save image conditions, Image output conditions, parallel output setting (8 outputs from OUT0 to OUT7 and 16 outputs from OUT0 to OUT15, or all setting output) |
| Functional specifications : Collective moving | Collective movement of set checkers in units of position/rotation adjustment groups Specify the "Move" or "Not move" option for each checker type. Position and rotation adjustment checkers cannot be moved. |
| Functional specifications : Marker | 8 markers/product type max. for each camera, Graphic display on the operation screen, Selectable from six colors |
| Functional specifications : Marker : Shapes | Rectangle/Circle, Ellipse/Polygon/Line/Cross |
| Functional specifications : Data R/W | Two-window display of up to 80 (5×16) cells/product type on screen in table form in RUN mode Substitution of title input, checker conditions/results, numerical calculation results, numerical calculation judgment results, judgment results, statistical results possible. Change of upper/lower limits of numerical computation in the table in RUN mode possible. |
| Functional specifications : Select menu | Maximum registrable number of arbitrary setup items in setup screen on menu: 16 items x 50 pages/type. |
| Functional specifications : Select menu : Registration information | Button / Text / Page move / Separator |
| Functional specifications : Select menu : Button allocation method | FUNC key for item / Selection from list |
| Functional specifications : Select menu : Others | Page name registration possible |
| Functional specifications : Calibration | Coordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions for each product type. |
| Functional specifications : Calibration : Processing method | Unit conversion / 1 point coordinate conversion / 2 point coordinate conversion / 3 points coordinate conversion |
| Functional specifications : Calibration : Operation method | Static / Dynamic |
| Functional specifications : Calibration : Standard registration | Arbitrary position / Smart matching / Contour matching / Intersection / Centre of circle / Feature extraction |
| Functional specifications : Conversion data | Coordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions. |
| Functional specifications : Conversion data : Others | Comment input |
| Functional specifications : Template re-registration settings : Position | Set position/Adjusted position |
| Functional specifications : Template re-registration settings : Display | Yes/No |
| Functional specifications : Execution mode : Normal execution | Execution of all checkers |
| Functional specifications : Execution mode : Branch execution | Destination blocks (0 to 9) can be set. |
| Functional specifications : Execution mode : Designated execution | Blocks to be executed (0 to 9) can be set. |
| Functional specifications : External input/output functions : Input : Inspection start instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Re-inspection start instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Product type change instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Template re-registration instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Display layout switch instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Operation/stop switch instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Statistics reset instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Error reset instruction | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to save setting data in the built-in memory | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to save setting data in the SD memory card | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to read setting data from the built-in memory | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to read setting data from the SD memory card | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to cancel the saving/reading of setting data | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to save the image memory in the SD memory card | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to erase the image memory | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Instruction to print the screenshot | Parallel, Serial, Ethernet * USB cannot be used for the external input/output functions. |
| Functional specifications : External input/output functions : Input : Inspection/processing cancellation instruction |
Resource & DownloadLưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | Panasonic – PV200 IMAGECHECKER Controller unit (Model: ANPV0202ADP).
PHỔ BIẾNHOT NEWS |
… [Trackback]
[…] Information to that Topic: ino.com.vn/khac-do-luong-kiem-tra/panasonic-pv200-imagechecker-controller-unit-model-anpv0202adp/ […]