Advantest-Digital Ultra-High Resistance/Micro Current Meters ( Model: R8340A )

0
309
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

The R8340A digital ultra-high resistance/micro current meters use an input amplifier gain switching type I-V converter, highspeed sampling A/D converter and low-noise high-response voltage generator. They are fast and precise, with a range from 10 fA to 19.999 mA for current measurement and 10 to 3 × 1016 for resistance measurement.

The R8340A has a continuously variable DC power supply with a voltage from 0.000 V to 1000.0 V as a voltage source for measuring high resistance. They can be used to test and inspect electric insulation materials such as synthetic resin and rubber, switches, connector and capacitors. With the use of accessories R12704 and R172708, surface resistivity rate, volume resistivity rate and the effect of temperature on both rates can be measured.

For micro current measurement, ion current and leak current can be measured with high sensitivity and precision.

The meters have a handler interface to be connected with external devices such as automatic handlers and fixtures.

Packed format output is used for higher efficiency in GPIB data transfer, so improved throughput is guaranteed in production lines and incoming inspections.
The meter is provided with the sequence program function to store measurement conditions and procedures, allowing measurements under the same measurement conditions at the touch of a button. The contact check function makes it possible
even for beginners to perform simple, stable and highly precise measurement.

Feature
Measurement of Micro Current from 10 fA to 19.999 mA
Measurement of High Resistance from 10 to 3 1016
High-Speed Charge/Discharge
High-Speed Measurement with 100 Samples/Second
Floating Measurement of 1100 VDC
Standard GPIB Interface

– See more at: http://www.testequipmentconnection.com/57657/Advantest_R8340A.php#sthash.EDRuesmf.dpuf

The R8340A digital ultra-high resistance/micro current meters use an input amplifier gain switching type I-V converter, highspeed sampling A/D converter and low-noise high-response voltage generator. They are fast and precise, with a range from 10 fA to 19.999 mA for current measurement and 10 to 3 × 1016 for resistance measurement.

The R8340A has a continuously variable DC power supply with a voltage from 0.000 V to 1000.0 V as a voltage source for measuring high resistance. They can be used to test and inspect electric insulation materials such as synthetic resin and rubber, switches, connector and capacitors. With the use of accessories R12704 and R172708, surface resistivity rate, volume resistivity rate and the effect of temperature on both rates can be measured.

For micro current measurement, ion current and leak current can be measured with high sensitivity and precision.

The meters have a handler interface to be connected with external devices such as automatic handlers and fixtures.

Packed format output is used for higher efficiency in GPIB data transfer, so improved throughput is guaranteed in production lines and incoming inspections.
The meter is provided with the sequence program function to store measurement conditions and procedures, allowing measurements under the same measurement conditions at the touch of a button. The contact check function makes it possible
even for beginners to perform simple, stable and highly precise measurement.

Feature
Measurement of Micro Current from 10 fA to 19.999 mA
Measurement of High Resistance from 10 to 3 1016
High-Speed Charge/Discharge
High-Speed Measurement with 100 Samples/Second
Floating Measurement of 1100 VDC
Standard GPIB Interface

The R8340A digital ultra-high resistance/micro current meters use an input amplifier gain switching type I-V converter, highspeed sampling A/D converter and low-noise high-response voltage generator. They are fast and precise, with a range from 10 fA to 19.999 mA for current measurement and 10 to 3 × 1016 for resistance measurement.

The R8340A has a continuously variable DC power supply with a voltage from 0.000 V to 1000.0 V as a voltage source for measuring high resistance. They can be used to test and inspect electric insulation materials such as synthetic resin and rubber, switches, connector and capacitors. With the use of accessories R12704 and R172708, surface resistivity rate, volume resistivity rate and the effect of temperature on both rates can be measured.

For micro current measurement, ion current and leak current can be measured with high sensitivity and precision.

The meters have a handler interface to be connected with external devices such as automatic handlers and fixtures.

Packed format output is used for higher efficiency in GPIB data transfer, so improved throughput is guaranteed in production lines and incoming inspections.
The meter is provided with the sequence program function to store measurement conditions and procedures, allowing measurements under the same measurement conditions at the touch of a button. The contact check function makes it possible
even for beginners to perform simple, stable and highly precise measurement.

Feature
Measurement of Micro Current from 10 fA to 19.999 mA
Measurement of High Resistance from 10 to 3 1016
High-Speed Charge/Discharge
High-Speed Measurement with 100 Samples/Second
Floating Measurement of 1100 VDC
Standard GPIB Interface

– See more at: http://www.testequipmentconnection.com/57657/Advantest_R8340A.php#sthash.EDRuesmf.dpuf

The R8340A digital ultra-high resistance/micro current meters use an input amplifier gain switching type I-V converter, highspeed sampling A/D converter and low-noise high-response voltage generator. They are fast and precise, with a range from 10 fA to 19.999 mA for current measurement and 10 to 3 × 1016 for resistance measurement.

The R8340A has a continuously variable DC power supply with a voltage from 0.000 V to 1000.0 V as a voltage source for measuring high resistance. They can be used to test and inspect electric insulation materials such as synthetic resin and rubber, switches, connector and capacitors. With the use of accessories R12704 and R172708, surface resistivity rate, volume resistivity rate and the effect of temperature on both rates can be measured.

For micro current measurement, ion current and leak current can be measured with high sensitivity and precision.

The meters have a handler interface to be connected with external devices such as automatic handlers and fixtures.

Packed format output is used for higher efficiency in GPIB data transfer, so improved throughput is guaranteed in production lines and incoming inspections.
The meter is provided with the sequence program function to store measurement conditions and procedures, allowing measurements under the same measurement conditions at the touch of a button. The contact check function makes it possible
even for beginners to perform simple, stable and highly precise measurement.

Feature
Measurement of Micro Current from 10 fA to 19.999 mA
Measurement of High Resistance from 10 to 3 1016
High-Speed Charge/Discharge
High-Speed Measurement with 100 Samples/Second
Floating Measurement of 1100 VDC
Standard GPIB Interface

– See more at: http://www.testequipmentconnection.com/57657/Advantest_R8340A.php#sthash.EDRuesmf.dpuf

The R8340A digital ultra-high resistance/micro current meters use an input amplifier gain switching type I-V converter, highspeed sampling A/D converter and low-noise high-response voltage generator. They are fast and precise, with a range from 10 fA to 19.999 mA for current measurement and 10 to 3 × 1016 for resistance measurement.

The R8340A has a continuously variable DC power supply with a voltage from 0.000 V to 1000.0 V as a voltage source for measuring high resistance. They can be used to test and inspect electric insulation materials such as synthetic resin and rubber, switches, connector and capacitors. With the use of accessories R12704 and R172708, surface resistivity rate, volume resistivity rate and the effect of temperature on both rates can be measured.

For micro current measurement, ion current and leak current can be measured with high sensitivity and precision.

The meters have a handler interface to be connected with external devices such as automatic handlers and fixtures.

Packed format output is used for higher efficiency in GPIB data transfer, so improved throughput is guaranteed in production lines and incoming inspections.
The meter is provided with the sequence program function to store measurement conditions and procedures, allowing measurements under the same measurement conditions at the touch of a button. The contact check function makes it possible
even for beginners to perform simple, stable and highly precise measurement.

Feature
Measurement of Micro Current from 10 fA to 19.999 mA
Measurement of High Resistance from 10 to 3 1016
High-Speed Charge/Discharge
High-Speed Measurement with 100 Samples/Second
Floating Measurement of 1100 VDC
Standard GPIB Interface

– See more at: http://www.testequipmentconnection.com/57657/Advantest_R8340A.php#sthash.EDRuesmf.dpuf

The R8340A digital ultra-high resistance/micro current meters use an input amplifier gain switching type I-V converter, highspeed sampling A/D converter and low-noise high-response voltage generator. They are fast and precise, with a range from 10 fA to 19.999 mA for current measurement and 10 to 3 × 1016 for resistance measurement.

The R8340A has a continuously variable DC power supply with a voltage from 0.000 V to 1000.0 V as a voltage source for measuring high resistance. They can be used to test and inspect electric insulation materials such as synthetic resin and rubber, switches, connector and capacitors. With the use of accessories R12704 and R172708, surface resistivity rate, volume resistivity rate and the effect of temperature on both rates can be measured.

For micro current measurement, ion current and leak current can be measured with high sensitivity and precision.

The meters have a handler interface to be connected with external devices such as automatic handlers and fixtures.

Packed format output is used for higher efficiency in GPIB data transfer, so improved throughput is guaranteed in production lines and incoming inspections.
The meter is provided with the sequence program function to store measurement conditions and procedures, allowing measurements under the same measurement conditions at the touch of a button. The contact check function makes it possible
even for beginners to perform simple, stable and highly precise measurement.

Feature
Measurement of Micro Current from 10 fA to 19.999 mA
Measurement of High Resistance from 10 to 3 1016
High-Speed Charge/Discharge
High-Speed Measurement with 100 Samples/Second
Floating Measurement of 1100 VDC
Standard GPIB Interface

– See more at: http://www.testequipmentconnection.com/57657/Advantest_R8340A.php#sthash.EDRuesmf.dpuf

Resource & Download

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | Advantest-Digital Ultra-High Resistance/Micro Current Meters ( Model: R8340A ).