IVUIM – Entry level potentiostat-galvanostat (Model: VERTEX)

0
361
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

 The Vertex is an entry level potentiostat/galvanostat with optional FRA/EIS and optional I/O port. Its price easily matches its application in educational and applied electrochemistry. A complete suite of IviumSoft control and data processing software is included (for Windows based PC's)

Key Specs
Available in various configurations:
             ±100mA@±10V
             ±1A @ ±10V 
             ±5A@±10V
             ±10A@±10V
             ±2A@±20V

– 8 current ranges: 10nA to 100mA (1A, 10A)
– WE/RE/S/CE 4-electrode configuration
– Floating operation
– Data acquisition rate 100 kHz
– Optional:

# FRA/EIS: 10µHz to 1MHz
Vertex entry level potentiostat
Key features
• Affordable solution:
The Vertex is an entry level potentiostat/galvanostat with optional FRA/EIS and optional I/O port. Its price easily matches its application in educational and applied electrochemistry. A complete suite of IviumSoft control and data processing software is included (for Windows based PC's).
• Wide application range:
The robust design, the high current of 1A, the floating operation and the availability of a wide range of electrochemical techniques makes the Vertex ideal for a variety of applications, including:
– educational
– routine electrochemistry and analysis
– batteries and fuel cells
– corrosion
– sensors
– biotechnology
• Expandability:
The Vertex can optionally be expanded with a True Linear Scan module and/or FRA/EIS capability. Next to that the Vertex is compatible with other Ivium options & modules, such as the HiMUX and  CIM.
• Hardware:
– Automatic current range selection: 1pA to 1A/1mV to 10V 
– Automatic variable noise filter and potentiostat/galvanostat stability settings
– Simultaneous acquisition of current/potential and peripheral signals
– Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory
– Applicable scanrates: 1µV/s to 10,000 V/s
– Minimum interval time/resolution: 10µs
– Result optimalisation by automated tuned filters, gain amplifiers and dc-subtraction
Software:
The Vertex is controlled via Ivium's own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is standard included with each instrument.
Hardware specs
System Performance:
Current compliance ±100mA ±1A ±2A ±5A ±10A
Maximum output Voltage ± 10 V ± 10 V ±20V ± 10 V ± 10 V
Potentiostat Bandwidth >500 kHz
Stability settings High Speed, Standard, and High Stability
Programmable response filter 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
Signal acquisition dual channel 16 bit ADC, 100.000 samples/sec
Potentiostat:
Applied potential range ±10 V, at 0.333mV resolution; (±20 V, at 0.667mV resolution)
Applied potential accuracy 0.3%, or 2 mV
Current ranges ±100 nA to ±100mA (±1A, ±10A)
Measured current resolution 0.015% of current range, minimum 15pA
Galvanostat
Applied current resolution 0.033% of applied current range
Applied current accuracy 0.3%
Potential ranges ±10 mV, ±100 mV, ±1 V, ±10 V (±20V)
Measured potential resolution 0.004% of potential range, minimum 0.4µV
Impedance Analyser (optional)
Frequency range 10µHz to 1MHz
Impedance range recommended for 20 mOhm to 10 GOhm
Amplitude 0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset 16 bit dc offset subtraction, and 2 dc-decoupling filters
Special functions
Ohmic drop compensation 2 V/current range, 16 bits resolution
Electrometer
Input impedance >100 Gohm //<20pF
Input bias current <20 pA
Bandwidth >1.5 MHz
Peripheral connections 
Shared Analog input/output
(user selectable)
0 to ±10 V, 16 bits resolution, bandwidth 40 kHz
Environment
Power requirements 100-240 V, 45-65 Hz, 20 VA via included 12 V supply
Interfacing USB 2.0 and 3 compliant
Size  w x d x h = 13 x 27 x 4 cm
Weight 1.5 kg
PC requirements Windows XP/Vista/7/8, with free USB port

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | IVUIM – Entry level potentiostat-galvanostat (Model: VERTEX).