Signal Recovery- Wideband Preamplifier (Model: 5185)

0
339
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

Overview

The model 5185 is a wideband voltage preamplifier with a frequency response from DC to 200 MHz and switchable gain settings of x10 (20 dB) or x100 (40 dB). It has a selectable input impedance of 50 Ω or 1 MΩ and a DC offset facility.

The 50 Ω frequency response extends from DC to 200 MHz with an equivalent input noise of 10 nV/√Hz at 10 kHz. The 1 MΩ response exceeds 100 MHz, has switch selected AC or DC coupling and an equivalent input noise of 30 nV/√Hz at 10 kHz.
A ground switch allows the input signal to be isolated from the output and an adjustable offset facility allows a DC offset on the input signal to be subtracted before it reaches the amplifier output. An overload detector is also provided.

The unit is powered from an external line power supply module, model PS0108, included with each instrument. Signal connections are made via the front-panel BNC connectors.

The model 5185 will prove invaluable for users who need a compact, low cost, high performance wideband preamplifier. It is an ideal accessory for use with oscilloscopes, digitizers, signal averagers and boxcar averager systems.

  • 50 Ω or 1 MΩ input impedance
  • Low noise
  • x10 or x100 gain
  • DC to > 200 MHz frequency response
  • DC offset control
  • Line power
  • Signal averager preamplification
  • Boxcar averager preamplification
  • Increasing sensitivity of oscilloscopes and fast ADC

Specifications

General
DC coupled wideband voltage amplifier with selectable x10 (20dB) or x100 (40dB) voltage gain and a maximum frequency response extending from DC to > 200 MHz. Single-ended input and single-ended output via BNC connectors.

Line powered from model PS0108 power supply included with each unit.

Inputs
Configuration Single-ended. Front panel ground terminal provided
Coupling
50 Ω input
1 MΩ input
DC only
DC or AC
Impedance 50 Ω or 1 MΩ // 25 pF
Frequency Response
50 Ω Input
DC to 200 MHz
±1 dB)
DC to 250 MHz
(+1 to -3 dB)
1 MΩ input DC DC to 100 MHz
(±1 dB)
DC to 125 MHz
(+1 to -3 dB)
1 MΩ input AC 5 Hz to 100 MHz
(±1 dB)
5 Hz to 125 MHz
(+1 to -3 dB)
Equivalent input noise, rms.
50 Ω input
1 MΩ input

10 nV/√Hz @ 10 kHz
30 nV/√Hz @ 10 kHz

Rise and Fall Times
50 Ω input
< 2 ns
1 M Ω input < 2.6 ns
Max input voltage
x10 gain
x100 gain
100 mV pk-pk
10 mV pk-pk
Gain x10 (20 dB) or x100 (40 dB)
Gain Accuracy ±3% at 10 kHz
Gain Stability ±250 ppm/*C
Output
Impedance 50 Ω
Max voltage swing >1 V pk-pk
Slow rate >2000 V/µs (unloaded)
Polarity Non-inverting
DC Stability 100 µV//ºC (referred to input)
DC Offset Control Range µ 10 mV (referred to input)
Power
a)
b)
±15 V or ±18 V DC @ 300 mA
110 V AC or 240 V AC via external model PS0108 power supply included with unit
Dimensions
(excluding connectors)
8.25" wide x 11" deep x 3.5" high (210 mm wide x 279 mm deep x 89 mm high)
Weight 6.4 lbs (2.9 kg) excluding power supply

Resource & Download

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | Signal Recovery- Wideband Preamplifier (Model: 5185).