Land-Extractive combustion analyzer ( Model: FGA 900 series)

2
369
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

 Overview:

The FGA 900 series of combustion efficiency monitors use dual sensor technology to measure the levels of up to Carbon Monoxide (CO) and Oxygen (O2) in a single compact unit.

Key Features

 – Fully integrated system in a single compact box – no additional components required

  – Suitable for a wide range of applications – up to 3 gases in a single analyzer

 – Simple installation – locate the analyzer anywhere, including outside locations

Key Benefits

 – Combustion efficiency measurement – for optimizing process efficiency where conditions are changing

 – Low maintenance – straightforward servicing without specialist skills

 – Proven high performance – dual sensor measurement technique, T�V and MCerts approved/Certified to US EPA standards
Specification:
Technical Details
Measurement Ranges
CO Ranges: 0 – 50 ppm up to 0 – 2 000 ppm
Resolution: 1 ppm / 1 mg/m3
Linearity: < 2 % of range
Zero drift: < 2 % of range per month
Span drift: < 2 % of range per month
O2 Ranges: 0 – 5 % to 0 – 25 %
Resolution: 0.1 Vol %
Linearity: < 0.2 Vol %
Zero drift: < 0.2 Vol % per month
Span drift: < 0.2 Vol % per month
Calibration: Microprocessor controlled
Standard: Manual gas selection
Display: LCD with backlight
 Indicators: External 'Power On' and 'System OK' LEDs
Outputs/Inputs
Analog outputs: Isolated current loop outputs
Efficiency (on FGA 930E only) 
0, 2, or 4 to 10 or 20 mA
Relay outputs: System OK; Maintenance/Calibration
Relay rating: Isolated changeover S.P. 1 A @ 240 V a.c.
5 A @ 240 V d.c. resistive for
Alarm – one per gas measured
Span and Zero Gas Relays for calibration gases
Inputs: Current loop inputs for ambient and process temperatures
(only needed for FGA 930 E)
Environmental
Environmental rating: IP65 / NEMA 4
Operating (ambient) temp.: 0 to +35 °C / 32 to 95 °F standard
to -20 °C / -4 °F with optional case heater
to +50 °C / 122 °F with optional air conditioner
Compliance 
Measurement standards: Meets the requirements of ISO 12039, ISO 10849 and ISO 7935
Approvals: MCerts for Continuous Emissions Monitoring Systems (Nov 1998)
T�V approved to the 13th & 17th BImSchV and TA L�ft
USEPA certified to PS-3, PS-4 and PS-4A
Electrical safety: Conforms to EN-61010-2
EMC: Conforms to EN-50 081 & EN-50 082
Power
Power supply: 110 V a.c. or 230 V a.c., ±20 %, 50 – 60 Hz
Power consumption: 300 W
Gas and Air requirements
Instrument air (zero calibration): 2 bar / 30 psi clean and dry, 5 l/min / 0.2 cfm
Instrument air  (cooling): 2 – 10 bar / 30 – 150 psi clean and dry, 90 l/min / 3 cfm
Calibration gas    (recommended): 2 bar / 30 psi, 5 l/min / 0.2 cfm
20 Liters / 0.7 cu.ft. per calibration approx.
Calibration gas type: Specific to each gas type and measurement span
Dimensions (HxWxD): 600 x 600 x 350 mm / 24 x 24 x 14 in
Weight: 53 kg / 117 lb
Options
Special measurement ranges
Automatic calibration
Efficiency measurement (FGA 930 E only)
Probe type
Sample line type
Case heater
Air conditioner/vortex cooler

Resource & Download

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | Land-Extractive combustion analyzer ( Model: FGA 900 series).

2 COMMENTS

  1. … [Trackback]

    […] There you can find 17215 additional Info to that Topic: ino.com.vn/khac-do-luong-kiem-tra/land-extractive-combustion-analyzer-model-fga-900-series/ […]