Shimadzu-IG (Model:1000 Plus)

0
337
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

Voyaging into the Single Nano Region

The IG-1000 Plus Single Nano Particle Size Analyzer: An Instrument That Goes Beyond the Single Nano Region and Enters the Sub Nano Region

This instrument uses the induced grating (IG) method, which is based on a new principle for measuring the size of nanoparticles using the phenomenon of dielectrophoresis and diffracted light.

With dynamic light scattering, the conventional method, the light scattered by particles decreases sharply for particle sizes of less than 100 nm. Furthermore, in the single nano region (i.e., particle sizes of less than 10 nm), there are physical restrictions that make it difficult to detect scattered light, and the measurement of particle sizes also becomes difficult. The IG method does not use scattered light and so it is free from these physical restrictions, and does not require the input of the refractive index as a measurement condition. It therefore allows the size of nanoparticles to be measured simply and with high sensitivity,and is particularly effective in the analysis of single nanoparticles.

High-Sensitivity Analysis of Single Nanoparticles

Optical signals emitted by the diffraction grating formed by the particles, not scattered light emitted by the particles, is used for measurement and so, even in the single nano region, a sufficient S/N ratio can be obtained, and stable measurement with good reproducibility is possible.

Resistance to Contamination

The new measurement principle is resistant to contamination and so, even if the sample is mixed with small amounts of foreign particles, information about the particles to be analyzed is still caputured. Therefore the filtering of samples in order to remove coarse particles is not required.

High Reproducibility

The new measurement method ensures high reproducibility and the acquisition of stable data. In particular, high reproducibility for particle sizes of less than 10 nm removes the uncertainty and vagueness of particle analysis in the single nano region. Also, comparison with raw data of diffracted light is possible and so rough validation of the measurement results can be performed simply.

What Is the "Induced Grating Method"?

The concentration of nanoparticles expresses itself as the amount of change in the refractive index of the medium and so if a cyclic concentration distribution of the particles is formed in the medium by an external force, it functions as a diffraction grating. If the external force is removed, the diffraction grating disappears. With the IG method, the decay process of this particle density diffraction grating is measured via the change in intensity of the diffracted light, and a diffusion coefficient is obtained.

intensity of the diffracted light

Diffraction Grating Consisting of Microscopic Particles Formed by Dielectrophoresis

An alternating voltage is applied to cyclically arranged electrodes, and a cyclic concentration distribution of microscopic particles is formed in the liquid by dielectrophoresis. Although the cyclic concentration distribution of microscopic particles acts as a diffraction grating (a particle concentration diffraction grating), if the alternating voltage is stopped, the grating diffuses and disappears (patent pending).

Key Point of IG Method

-Precision Measurement Achieved with Modification of Electrode Configuration-

The cyclically arranged electrodes also function as a diffraction grating. The diffracted light created by this electrode diffraction grating is weaker than the diffracted light created by the particle concentration diffraction grating, and in order to precisely measure the changes in the primary diffracted light resulting from the diffusion of the particle concentration diffraction grating, it is ensured that the positions of the two forms of primary diffracted light do not coincide. For this reason, the electrode configuration has been modified as shown in the figure so that the pitch of the electrode diffraction grating is half that of the particle concentration diffraction grating (patent pending).

Specifications

IG-1000 Plus
Measurement Principle Induced grating (IG) method
Measurement Range 0.5 to 200 nm
Measurement Time 30 sec (from the start of measurement to the display of results)
Sample Liquid Volume 250 to 300 µL
Measurement Unit Light Source Semiconductor laser (wavelength: 785 nm; output: 3 mW)
Light-receiving Unit Photodiode
Cell Batch cell (material: Pyrex glass*1)
Output Terminal Serial output (connector type: D-Sub, 25 pin, female)
Temperature Setting Range 7°C to 40°C (cell holder temperature setting range*2)
Operating Environment Temperature: 15°C to 35°C
Humidity: 20% to 80% (without condensation) Humidity: 20% to 80% (without condensation)
Power Supply AC 115 or 230 V ±10%
Size and Weight 600 (W) x 400 (D) x 200 (H) mm, approx. 15 kg
*1: Do not use the kind of solvents that may damage Pyrex glass.
* : Measurement is possible as long as the conductivity of the sample liquid does not exceed 400 μS/cm (microsiemens per centimeter). (For example, saline and seawater cannot be used for measurement unless they are greatly diluted.)

Parts Required for Installation

Micropipette "Required to inject samples into the cell. Provide a micropipette that can measure out 200 µL with an accuracy of 5%."

Fullerene Hydroxide

Fullerene hydroxide, which is a typical material of samples in the single nano region, can be analyzed with high reproducibility.

Fullerene Hydroxide

Silica Sample with Broad Distribution

Even with samples covering a wide distribution, there is no bias toward larger particles, and the existence of smaller particles is captured accurately.

Silica Sample with Broad Distribution

Samples Containing Contamination

Measurement results are not affected by minute quantities of contamination. (The example shows the results obtained for a sample with a distribution centering on a diameter of 50 nm that contains a 1% concentration of 1-µm particles.)

Samples Containing Contamination

Analysis of Mixed Samples

Mixed samples can be evaluated. The IG method uses the diffusion of the diffraction grating created by particles and so the signal size does not depend on the particle size. This means that evaluation of mixed samples is possible. With methods based on scattered light, even if the volume is the same, the signal size is proportional to the cube of the particle diameter and so the evaluation of mixed samples is difficult.

Colloidal silica

Colloidal silica

Polystyrene latex

Polystyrene latex

The contents of this page are subject to change without notice.

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | Tel: (+84) 028 73000184 | Shimadzu-IG (Model:1000 Plus).