Yokogawa-Osciloscope (Model:DL850/DL850V SCOPECORDER)

The DL850 ScopeCorder Series are modular, waveform recording instruments that can measure voltage, current, strain, acceleration, and other phenomena– simultaneously.

With high speed sampling, high isolation withstand voltage, and multichannel measurements, the DL850 Series offers powerful support in the development, evaluation, and quality control of energy efficient devices.

Introducing Our Ultra-Fast Memory Recorder

• High-speed (up to 100 MS/s), High Resolution (up to 16-bit), Isolated (up to 1kV*1)
• Multi-channel, up to 128 Voltage/Temperature or 128 logic bits
• Continuous hard disk recording at 100 kS/s simultaneously on 16 channels*2
• CAN and LIN buses monitoring and trend waveform display (DL850V only)
• 17 plug-in modules

*1. With the isolated probe (700929 or 701947)
*2. With the /HD0 or /HD1 option

The DL850 ScopeCorder Series are modular, waveform recording instruments that can measure voltage, current, strain, acceleration, and other phenomena– simultaneously. With high speed sampling, high isolation withstand voltage, and multichannel measurements, the DL850 Series offers powerful support in the development, evaluation, and quality control of energy efficient devices.

For increasingly fast inverter signals

High speed (100 MS/s), High resolution (12-bit), 1kV isolated measurements.*

Yokogawa's isoPRO technology offers industry-leading isolation performance at the highest speeds. The isoPRO core technology is designed with energy savings applications in mind. It gives you the performance needed to develop high efficiency inverters, which employ high voltages, large currents, and high operating speeds.

Example – Measuring Inverter Output
Accurately observe inverter startup waveforms with sufficient time resolution. You can confirm that no excessive overshoots occured.

	High Speed & High Withstand Voltage Isolation Technology
	Using high speed optical fiber-based transmissions, the module achieves high speed ADC clock and data isolation. 720210 High-speed 100 MS/s 12-Bit Isolation Module(Max. four(4) modules can be installed in a main unit.)

Example: Same inverter output waveform measured at 10MS/s and 100 MS/s

17 plug-in modules allow for flexible assorted measurements.

The lineup includes two new module types: A 16-CH Temp./Voltage Input Module, and a CAN & LIN Bus Monitor Module (DL850V only). All DL850 modules can be combined with measurement modules from the DL750 series products:

Note: The firmware version 2.00 or later is required when using the 16-CH Temp./Voltage Input Module(720221) and/or CAN&LIN Bus Monitor Module(720241).

Advanced – Even More Measurement Points – Up to 128 CH of voltage input and 128 bits of logic input

The 16-CH Voltage Input Module (scanner type*) can measure at 10 kS/s sample rate even when using all 16 channels. With this module populating all 8 input module slots, the DL850 performs 128-CH voltage measurements.

The Logic Input Module supports everything from TTL levels, to high voltage contact closures at up to 10 MS/s*. With eight logic modules, the DL850 can monitor and capture 128 bits of logic.

Example: Measuring the startup sequence of a multi-output power source

Power supplies used in home computing electronics have many outputs, and it is necessary to control the sequences from output to output.  With a multichannel module, you are not limited to voltage measurements; a single unit can also measure everything from PC control signals to AC fan operation, individual component temperatures, and slow to high-speed signals.

Ch 1: AC Input Voltage Ch 6: Supply Voltage Ch 2: Reference Voltage Ch 3: Reset Signal Ch 1: Fan Rotation 16-bit logic: Control Signals 4-bit logic: Serial Communication

Catch transients in durability with high-speed sampling – Dual Capture

To visualize long term trends in durability testing and other situations, data is typically acquired at low-speed sample rates. On the other hand, suddenly-occurring transitional phenomena should be captured at high-speed sample rates.

The "Dual Capture" feature resolves these conflicting requirements by recording at two different sampling rates.

1. 

   Zoom Waveform – You can record up to 5,000 phenomena of high speed trigger measurements (up to 100 MS/s) at a record length of 5-500 kPoints while taking trend measurements at up to 100 kS/s.

2. Event Waveform -Displays the timing at which high speed "sub" waveforms are acquired
3. Low Speed Main Waveform – Max: 100 kS/s Trend waveform displayed in a low-speed Roll mode
4. Capture Waveform – Max 100 MS/s Capture transients with high speed trigger measurement

Example: Parts Durability Testing

Parts used in automobiles and other transportation vehicles must be highly reliable. The "Dual Capture" function is very effective when performing vibration testing of connectors under varying temperatures.

• Chattering is accurately captured at high-speed sampling
• Check the frequency of occurence at low-speed sampling